LEVER HEIGHT ADAPTER BSCTOOLS

Set your shifter and brake levers to the same height using our Lever Height Adapter tool in conjunction with your derailleur hanger alignment tool.
Mount your hanger tool into the lever adapter - suggest you have a headset spacer sitting above the top of the fork steerer as your fork steerer may not be cut totally accurately.
LHA-1 works with aheadset systems where a M6x1mm threaded star nut is used in the steerer tube.
50mm long M6 set screw provided.
Updated version has a slot for a tape measure to be used with it.
LHA M15x1 works with older Cannondale / FSA M15x1 external threaded fork bungs. Note: now works for new and old Cannondale forks (past few seasons) have a thicker steerer tube wall
Replace and adjust your headset top cap when done.
Now available - a bolt which will allow you to check the seat alignment using your own brake or gear cable.