• New
* The colors of the products displayed in photos may vary from one screen to another depending on their calibration.

DUKE RIM WORLD RUNNER CARBON 38 SLR2

Points Forts

LIGHTNESS  - DURABILITY - MANOEUVRABILITY - RIM WIDTH - TUBELESS COMPATIBILITY



Carbon rim Tubeless ready for brake disc. Made for Gravel bike.
Variantes disponibles
395 g
€540.00 Tax included
7 In stock

Expected shipping date: 29/03/2024
 
Quantity

favorite_border favorite

The DUKE World Runner Carbon has a profile height of 38mm. Inner width 25mm: This gives more volume to the tires and thus improves efficiency, Comfort and grip in turns. A wide rim also means being able to use the finer and lighter tires while maintaining comfort, The softness and grip provided by a larger volume of air. More info
SLR2* Factory Process
All our carbon MTB rims now benefit from the manufacturing process tested and approved by the Super Light Road 2, which offers a 15% gain in rim’s weight.
This manufacturing process goes even further today as it is now made under dust-free laboratory and no longer requires sanding nor painting.
SLR2 products have an excellent aesthetic appearance, right out of the mold.
As no longer painted, the rims can not be scratched.
Impact resistance is not left out, since it is also improved by 20%.
SLR2 rims are built from UD carbon fiber only.
(*R = Road)

Technology

  • VFP (Varnish Free Process)

    Since 2021, our carbon rims benefit from a unique finish: incomparable brilliance and reflections thanks to a new process called VFP without varnish. This, also and above all, makes them more environmentally friendly by drastically reducing VOC and carbon dust emissions compared with a traditional rim. Without varnish, the rim is also harder on the surface, and more resistant to scratches.

  • Tubeless

    Our Tubeless compatible rims (UST, Tubeless Ready and Notubes), only require some Duke rim tape and a Tubeless-ready valve. They can also be used in a classic clincher set up (tyre & inner tube).

  • SLR2 (Super light road series 2)

    The SLR2 series for Road and Gravel is 15% lighter and more resistant than the sls version thanks to a completely new lay-up and a new resin which not only allow the same lateral rigidity to be maintained but also and above all to considerably improve the comfort, vibration filtering and rim performance. The SLR2 is manufactured in a sealed atmosphere and does not require any retouching when it comes out of the mould. No rework or varnish, the VFP gloss finish is ecological and exceptional!

  • Hooked

    We keep the hooks on all our gravel and road rims. As the pressures used are higher than in mountain bikes, the risk of the tire sliding off the rim is too high with hookless rims. What's more, for a given inside width, rims with hooks have a wider outer width than rims without hooks, which enhances the aerodynamics of the rim/tire assembly.

  • Ultimate Comfort

    Thanks to the latest innovations and our research into composite material, we have been able to develop a unique process that maximizes compliance and absorbs vibrations. The result is an ultra-dynamic rim that filters out the imperfections of the terrain to be appreciated whatever the distance.

  • Offset

    Rim offset increases lateral stiffness and wheel stability without adding weight. The rim holes are off-center, improving the spokes brace angles. By better balancing the tensions between the two spoke sides, the wheel's durability is enhanced.

  • Width

    A wider rim provides greater comfort for the same tire cross-section, thanks to the greater volume of air in the tire. No need to inflate so much! The greater volume also enhances performance and grip. The bike's stability when cornering is also improved: a wider inner width reduces tire rolling under the rim under lateral loads. Using a wide rim improves comfort and control.

Data sheet

RIM MATERIAL
CARBON
RIM PROFILE
SYMMETRICAL
INSIDE WIDTH (MM)
25.0
TYPE OF BRAKING
DISC
MAX STRAIN (N)
1200.0
PRACTICE TYPE
BEACH RACE
GRAVEL BIKE
ROAD E-BIKE
TANDEM ROAD
VAE GRAVEL
NIPPLE POSITION
EXTERNAL
NIPPLE HEIGHT (MM)
14.0
TYPE OF TYRE
CLINCHER
TUBELESS
POSITION
FRONT
REAR
VALVE HEIGHT (MM)
54
TAPE WIDTH (MM)
28.0
MAX PRESSURE (BAR)
4B WITH 40MM TYRE
ERD JANTE(S)
567.5
SYSTEM MAX WEIGHT (KG)
135
RIM HEIGHT (MM)
38
ETRTO (MM)
622.0
MOUNTING WITH WASHERS
NON
TYRE SECTION RANGE
34MM 1,35" / 61MM 2,40"
STICKERS RANGE
DUKE SERIE2 H
TYPE STICKER
H36D
WARANTEE
3 YEARS
SECTION AÉRO
29-30MM
LARGEUR EXTÉRIEUR (MM)
32.0

Crash replacement

We offer a crash replacement programme for carbon wheels. In case of accidents or heavy falls, violent shocks can damage your rim and make it impossible to use. With our Crash Replacement offer we offer you a service that allows you to replace your rim under special conditions: You get a 50 percent discount on the price of the rim (UD SLS carbon) 40 percent (3k Carbon), as well as the parts and the disassembly/reassembly. This offer is valid (for life) for an unlimited period of time for DUKE carbon rims and is transferable in the event of sale of the wheels to a third party.

More

Supplier info
3701517702636 3701517702643 3701517702650
 

Fast delivery and careful

 

International delivery

 

Delivery by Chronopost

 

Secure payment