* The colors of the products displayed in photos may vary from one screen to another depending on their calibration.

Wheel(s) DUKE FURY STAR / BARON IS

Name: Wheel(s) DUKE FURY STAR / BARON IS
Brand: BARON
SKU: FS6TERS-BRIS
Price: 500.4 EUR
Availability: InStock

The Fury Star 6TERS are aluminum rims designed for Enduro use. The front/rear widths are differentiated: 32mm/28,5mm. This rim is also compatible with E-bike. These rims are used in the Enduro World Series by the Team Commençal - Les Orres, the Team Scott SR-Suntour and by many other riders.

I want to configure :

a wheelset a front wheel a back wheel

I want to receive my wheels :

Build

Unbuild

With :

Front wheel

Back wheel

Front option

Back option

0.0 g +/- 30 g

€500.40 Tax included

Expected shipping date: __/__/____ Refresh

Configurer complètement votre produit avant de pouvoir l'ajouter au panier

Quantity

dealer locator

Wheel owner's manual

They are characterized by a lateral stiffness adapted to this use and a very good strength. The weight remains low thanks to its profile and the Dynamal aluminum used. These rims feature a new modern lower and wider geometry with an asymmetric profile and hookless sidewalls. A large tire and rim width reduces inflation pressures. This improves performance on dry ground, comfort, grip and limits the rolling effects of the tire under the rim in the downforce. The front and rear widths are differentiated (6TERS concept): the greater width at the front will give a larger volume to the tire to provide more grip in the supports. The rear rim has a smaller section to improve comfort and impact resistance. The rim holes are off-centered (offset), which allows the spokes brace angle to be further closed. Thus the rim is more stable and the lateral stiffness of the wheel is increased. The tensions of the spokes between the two layers are more balanced, which guarantees better durability of the wheel. The hookless walls (without hook) make it possible both to reinforce the rim and to reduce its weight. Anti-burp system: the tire bead is kept in position whatever its pressure, no risk of air loss in the corners. DUKE owns its manufacturing tools.

Technology

Hookless
This technology has been successfully used on our MTB rims since 2011. It reduces rim weight. Strength is improved. The tire is slightly bigger. Carbon rims are simpler and more economical to manufacture.
6Ters
6TERS is a concept of MTB rims differentiated between front and rear: a front wheel must maximize grip (inner width +), handling (rotational weight -) and control (lateral stiffness -). A rear wheel must provide traction, comfort (vertical stiffness-), stability (lateral stiffness +), efficiency (inside width -) and be stronger (reinforcements). Developed in collaboration with Julien Absalon (five-time world champion).
AntiBurp
Thanks to this antiburp, the tire bead is held in position at all low pressures and under all loads, so there's no risk of the bead sliding off the rim or losing pressure even when cornering hard. Two edges prevent the tire beads from sliding horizontally towards the inside of the rim. Even after a puncture, the tire stays in place on the rim
Tubeless
Our Tubeless compatible rims (UST, Tubeless Ready and Notubes), only require some Duke rim tape and a Tubeless-ready valve. They can also be used in a classic clincher set up (tyre & inner tube).
Dynamal
Dynamal is 50% stronger than 6061-T6. Unlike standard alloy blends, Dynamal is a pure alloy, enriched with magnesium-silicon and combined with a confidential metal to harden it. Compared with traditional alloys, Dynamal offers a significant increase in stress and impact resistance, without any reduction in fatigue strength.
Polyaxial-drilling
The orientation of the holes of a rim allows a perfect alignment of the nipples and spokes, which brings a better lifetime of the spokes, the rim and the wheel.
Offset
Rim offset increases lateral stiffness and wheel stability without adding weight. The rim holes are off-center, improving the spokes brace angles. By better balancing the tensions between the two spoke sides, the wheel's durability is enhanced.

Sapim Spokes

Sapim is THE brand of spokes, made in Belgium since 1918. Several models of spokes are available, within the limits of compatibility with the practice and the chosen rim:

Sapim CX-Ray: flat spoke, very light, durable, aero and very dynamic (309g / 64 pcs / 292mm)
Sapim CX-Sprint: Flat spoke identical to the CX-Ray but thicker for even more rigidity (373g / 64pcs / 292mm)
Sapim D-Light: round spoke, light and durable, with a 1.65mm diameter central part, good value for money (344g / 64 pcs / 292mm)
Sapim Race: round, sturdy and rigid spoke with a 1.8mm diameter central part (408g / 64 pcs / 292mm)

Nipples

Aluminium nipples with locking thread, available in 16 colours: black, red, silver, metal grey, blue, aqua blue, gold, light gold, dark green, mint syrup green, lime green, lilac, pink, fuchsia pink, orange and oil slick.