• New
* The colors of the products displayed in photos may vary from one screen to another depending on their calibration.

DUKE RIM FURY JACK SLS4 FRONT

The Fury Jack SLS4 are carbon rims adapted to an Enduro use. The front/rear widths are differentiated : front 32.5mm for only 435g 

Points Forts

-

Variantes disponibles
435 g
€546.00 Tax included
0 In stock

Expected shipping date: 07/06/2024
 
Quantity

favorite_border favorite

Technology

  • VFP (Varnish Free Process)

    Since 2021, our carbon rims benefit from a unique finish: incomparable brilliance and reflections thanks to a new process called VFP without varnish. This, also and above all, makes them more environmentally friendly by drastically reducing VOC and carbon dust emissions compared with a traditional rim. Without varnish, the rim is also harder on the surface, and more resistant to scratches.

  • Hookless

    This technology has been successfully used on our MTB rims since 2011. It reduces rim weight. Strength is improved. The tire is slightly bigger. Carbon rims are simpler and more economical to manufacture.

  • SLS4 (Super light series 4)

    The SLS4 series for mountain bikes is 10% lighter and more resistant than the sls3 version thanks to a completely new lay-up and a new resin which not only allow the same lateral stiffness to be maintained but also and above all to considerably improve comfort, vibration filtering and rim performance. The SLS4 is always manufactured in a sealed atmosphere and does not require any retouching when it comes out of the mould. No rework or varnish, the VFP gloss finish is ecological and exceptional!

  • 6Ters

    6TERS is a concept of MTB rims differentiated between front and rear: a front wheel must maximize grip (inner width +), handling (rotational weight -) and control (lateral stiffness -). A rear wheel must provide traction, comfort (vertical stiffness-), stability (lateral stiffness +), efficiency (inside width -) and be stronger (reinforcements). Developed in collaboration with Julien Absalon (five-time world champion).

  • AntiBurp

    Thanks to this antiburp, the tire bead is held in position at all low pressures and under all loads, so there's no risk of the bead sliding off the rim or losing pressure even when cornering hard. Two edges prevent the tire beads from sliding horizontally towards the inside of the rim. Even after a puncture, the tire stays in place on the rim

  • Anti-pinch

    Rim’s sidewalls are thickened to prevent cut of tires during impacts.

  • Tubeless

    Our Tubeless compatible rims (UST, Tubeless Ready and Notubes), only require some Duke rim tape and a Tubeless-ready valve. They can also be used in a classic clincher set up (tyre & inner tube).

  • Ultimate Comfort

    Thanks to the latest innovations and our research into composite material, we have been able to develop a unique process that maximizes compliance and absorbs vibrations. The result is an ultra-dynamic rim that filters out the imperfections of the terrain to be appreciated whatever the distance.

  • Offset

    Rim offset increases lateral stiffness and wheel stability without adding weight. The rim holes are off-center, improving the spokes brace angles. By better balancing the tensions between the two spoke sides, the wheel's durability is enhanced.

  • Width

    A wider rim provides greater comfort for the same tire cross-section, thanks to the greater volume of air in the tire. No need to inflate so much! The greater volume also enhances performance and grip. The bike's stability when cornering is also improved: a wider inner width reduces tire rolling under the rim under lateral loads. Using a wide rim improves comfort and control.

Data sheet

RIM MATERIAL
CARBON
RIM PROFILE
ASYMMETRICAL
INSIDE WIDTH (MM)
32.5
TYPE OF BRAKING
DISC
MAX STRAIN (N)
1200.0
PRACTICE TYPE
ALL MOUNTAIN E-BIKE
AM
E-BIKE ENDURO
END
TANDEM MTB
VAE XC
NIPPLE POSITION
EXTERNAL
NIPPLE HEIGHT (MM)
14.0
POSITION
FRONT
TYPE OF TYRE
CLINCHER
TUBELESS
VALVE HEIGHT (MM)
44
TAPE WIDTH (MM)
34.0
MAX PRESSURE (BAR)
2.2B WITH 2.40" TYRE
ERD JANTE(S)
FJ FR : 596
SYSTEM MAX WEIGHT (KG)
130
RIM HEIGHT (MM)
24
ETRTO (MM)
622.0
RIM OFFSET (MM)
3.0
MOUNTING WITH WASHERS
NON
TYRE SECTION RANGE
58MM 2,30" / 76MM 3,00"
STICKERS RANGE
DUKE SERIE2 L
TYPE STICKER
L58
WARANTEE
3 YEARS

Crash replacement

We offer a crash replacement programme for carbon wheels. In case of accidents or heavy falls, violent shocks can damage your rim and make it impossible to use. With our Crash Replacement offer we offer you a service that allows you to replace your rim under special conditions: You get a 50 percent discount on the price of the rim (UD SLS carbon) 40 percent (3k Carbon), as well as the parts and the disassembly/reassembly. This offer is valid (for life) for an unlimited period of time for DUKE carbon rims and is transferable in the event of sale of the wheels to a third party.

More

Supplier info
3701517723921 3701517723938
 

Fast delivery and careful

 

International delivery

 

Delivery by Chronopost

 

Secure payment