Display all pictures
Like it? Share it:
Add to wishlist
Warning: Last items in stock!
DUKE Wheelset Lucky Jack SLS2 6Ters / Industry nine Hydra
Versatile carbon wheel. Winner of the great comparison of Vojomag wheels. Used by the best world riders (Team SCOTT Creuse O2) ... Designed, developed and tested in France. DUKE is a French brand from the experience of the wheel maker JPRACINGBIKE1.
Weight of the pair in 29" with Sapim CxRay Spokes (32+32 spokes) without rim tape, valve and stickers: 1408g
Name of your friend * :
E-mail address of your friend * :
* Required fields
Send or Cancel
La jante multiple championnes du Monde avec Titouan Perrin-Ganier et Pauline Ferrand Prévot,...
-283 Item Items
The minimum purchase order quantity for the product is 1
Add to cart
1 440,83 €
The multiple champions of the World rim with Titouan Perrin-Ganier and Pauline Ferrand-Prévot, Europe and France! Used by the best teams and riders in the world (Absolut Abasalon BMC Racing Team, Team Scott Creuse O2, Velcan MTB Racing Team etc ..., as well as a certain champion of the Netherlands on Road, MTB and CX and also CX World Champion.
Pauline Ferrand-Prévot : XC World Cup 2019 in Snowshoe (USA)
ASSEMBLY IN FRANCEAll the wheels available on JPRACINGBIKE1 are assembled by hand in our offices in Vendée, France. This allows us to guarantee you a high precision and high quality assembly with optimized balancing of the spoke tensions. All this to offer you the most reliable wheels as possible. En savoir plus.
DUKE RIM LUCKY JACK SLS2 6TERS* The Lucky Jack by DUKE is a very light and broad rim for cross country and marathon use. Weighing 300g the weight is surprisingly low. Great value have the dimensions of the rim. With 31 mm outside and 25.6 mm inside the rim provides not only an excellent lateral stiffness, but also the tire optimum support width. Also at low air pressure, the driver (in) no spongy driving feel, as the tires can snap off bad side. Grip and comfort of the tire increase remarkably! Of course, the rim can be driven with sealing Tubeless "milk". The wheels are provided with an asymmetrical rim profile (as robust as a symmetrical profile), which requires a more uniform pitch angle of the spokes. This optimization of the spoke angle brings a number of advantages. The spoke tension on both sides can be better matched to one another, what is the shelf life of the spokes and the entire impeller conducive. The normally directional lateral stiffness is also adjusted so that the wheel appear rigid in itself. The height of the rim edge for 2015 is reduced by 1mm to further limit any risk of contact with the ground. Lateral stiffness improved by 40% compared to the previous version. Resistant to impacts even on the most brittle ground: Absorption of impact energy improved by more than 50% compared to the previous model. Anti-burp system: the heel of the tire is held in position whatever its pressure, no risk of "unseating". For the rim a Rider.
In 2019, MTB rims profiles are differentiated as we do not ask the rims the same qualities while riding :A front wheel must give grip, be light, stiff and handy.A rear wheel must be more comfortable, tronger and offer more efficiency.Thus the front and rear wheels have different profiles and lay-ups.In collaboration with Julien Absalon, the 6TERS front and rear profiles complement each other for a greater efficiency in the trails.Many of you are aware of different needs because you are already using different section tires at front and rear wheel.The Duke 6TERS* concept offers a wider front rim than the rear rim for more grip and stiffness. Its weight is optimized for robustness.The rear profile is reworked with a reduced section, with a new carbon fiber layer to improve compliance and increase the impact resistance, the constraints being much more important on the back wheel.SLS2 Factory Process ‘19All our carbon MTB rims now benefit from the manufacturing process tested and approved by the 2018 Super Light Series, which offers a 10% gain in rim’s weight.This manufacturing process goes even further today as it is now made under dust-free laboratory and no longer requires sanding nor painting.SLS2 products have an excellent aesthetic appearance, right out of the mold.As no longer painted, the rims can not be scratched.Impact resistance is not left out, since it is also improved by 20%.SLS2 rims are built from UD carbon fiber only.Anti-PinchRim’s sidewalls are thickened to prevent cut of tires during impacts. (*6TERS = sisters = sœurs)
CRASH REPLACEMENTDUKE offers a "Crash Replacement" program on its carbon wheels.In case of accidents or heavy falls, violent shocks can damage your rim and render its use impossible.With our "Crash Replacement" offer we offer you a service allowing you to replace your rim on special conditions and for an unlimited period:- You benefit a 30% reduction on the price of the rim, the disassembly / reassembly fees are offered to you. En savoir plus.
INDUSTRY NINE Hydra HUB
Industry Nine hubs are 100% made in Asheville, USA, and feature an incredible finish like Chris King. Industry Nine hubs combine many qualities.Featuring all of the advantages of the Hydra hub mechanism-low drag, low weight, and the ultimate in axle compatibility- tied into a traditional, "Classic" hub. Hydra Classic hubs are the solution for any rider seeking an approachable flanged hub to build into a no-compromise, high-performance wheelset. Standard and Boost specific hubshells available.
SAPIM SPOKESSapim has been producing spokes and nipples of the highest quality for over 90 years. From the beginning, maintaining a close relationship with customers has always been of the greatest importance for Sapim. --> Sapim CX-Ray (309g / 64 pcs / 292 mm)--> Sapim Super-CX Black nipples only (267g / 64 pcs / 292 mm)
NIPPLES Sapim Polyax Alu 14mm. Colors of your choice : black, red, silver, blue, gold, dark green, light green, purple, orange. --> Sapim aluminium nipples --> Sapim brass nipples (on request by completing the "Personnalisation" section)
ACCESSORIES Wheels are delivered with Duke tubeless valves, taped rims, 4x spare spokes and nipples. Wheels are available with different colors: white or black phantom or custom stickers.
Industry Nine hubs are 100% made in Asheville, USA, and feature an incredible finish like Chris King.
After saving your customized product, remember to add it to your cart. Allowed file formats are: GIF, JPG, PNG
* required fields
Be the first to write your review!
* Required fields
Submit or Cancel
ASSEMBLY IN FRANCEAll the wheels available on JPRACINGBIKE1 are assembled by hand in our offices in Vendée, France. This allows us to guarantee you a high precision and high quality assembly with optimized balancing of the spoke tensions. All this to offer you the most reliable wheels as possible.En savoir plus.
1 186,67 €
1 433,33 €
1 192,50 €
1 417,50 €
1 723,33 €
1 050,83 €
1 701,67 €