Display all pictures
Like it? Share it:
Add to wishlist
Delivery time confirmed to order
Warning: Last items in stock!
DUKE Wheelset Lucky Jack SLS3 6Ters / Bitex
Versatile carbon wheel. Winner of the great comparison of Vojomag wheels. Used by the best world riders (Team SCOTT Creuse O2) ... Designed, developed and tested in France. DUKE is a French brand from the experience of the wheel maker JPRACINGBIKE1.
Weight of the pair in 29" with Sapim CxRay Spokes (28+28 spokes) without rim tape, valve and stickers: 1300g / 1340g
Name of your friend * :
E-mail address of your friend * :
* Required fields
Send or Cancel
La jante multiple championnes du Monde avec Titouan Perrin-Ganier et Pauline Ferrand Prévot,...
-898 Item Items
The minimum purchase order quantity for the product is 1
Add to cart
1 061,67 €
The multiple champions of the World rim with Titouan Perrin-Ganier and Pauline Ferrand-Prévot, Europe and France! Used by the best teams and riders in the world (Absolut Abasalon BMC Racing Team, Team Scott Creuse O2, Velcan MTB Racing Team etc ..., as well as a certain champion of the Netherlands on Road, MTB and CX and also CX World Champion.
Pauline Ferrand-Prévot : XC World Cup 2019 in Snowshoe (USA)
ASSEMBLY IN FRANCEAll the wheels available on JPRACINGBIKE1 are assembled by hand in our offices in Vendée, France. This allows us to guarantee you a high precision and high quality assembly with optimized balancing of the spoke tensions. All this to offer you the most reliable wheels as possible. En savoir plus.
DUKE RIM LUCKY JACK SLS3 6TERS* The Lucky Jack by DUKE is a very light and broad rim for cross country and marathon use. Weighing 330g the weight is surprisingly low. Great value have the dimensions of the rim. With 30mm inside the rim provides not only an excellent lateral stiffness, but also the tire optimum support width. Also at low air pressure, the driver (in) no spongy driving feel, as the tires can snap off bad side. Grip and comfort of the tire increase remarkably! Of course, the rim can be driven with sealing Tubeless "milk". The wheels are provided with an asymmetrical rim profile (as robust as a symmetrical profile), which requires a more uniform pitch angle of the spokes. This optimization of the spoke angle brings a number of advantages. The spoke tension on both sides can be better matched to one another, what is the shelf life of the spokes and the entire impeller conducive. The normally directional lateral stiffness is also adjusted so that the wheel appear rigid in itself. The height of the rim edge for 2015 is reduced by 1mm to further limit any risk of contact with the ground. Lateral stiffness improved by 40% compared to the first version. Resistant to impacts even on the most brittle ground: Absorption of impact energy improved by more than 50% compared to the previous model. Anti-burp system: the heel of the tire is held in position whatever its pressure, no risk of "unseating". For the rim a Rider. (*6TERS = sisters = sœurs)
MTB rims profiles are differentiated as we do not ask the rims the same qualities while riding :A front wheel must give grip, be light, stiff and handy.A rear wheel must be more comfortable, tronger and offer more efficiency.Thus the front and rear wheels have different profiles and lay-ups.In collaboration with Julien Absalon, the 6TERS front and rear profiles complement each other for a greater efficiency in the trails.Many of you are aware of different needs because you are already using different section tires at front and rear wheel.The Duke 6TERS* concept offers a wider front rim than the rear rim for more grip and stiffness. Its weight is optimized for robustness.The rear profile is reworked with a reduced section, with a new carbon fiber layer to improve compliance and increase the impact resistance, the constraints being much more important on the back wheel. For the 3rd SLS version we now offer 3 rim widths 26, 28 and 30mm between hooks.SLS3 Factory Process.All our carbon MTB rims now benefit from the manufacturing process tested and approved by the Super Light Series, which offers a 10% gain in rim’s weight compared to the SLS2.This manufacturing process goes even further today as it is now made under dust-free laboratory and no longer requires sanding nor painting.SLS3 products have an excellent aesthetic appearance, right out of the mold.As no longer painted, the rims can not be scratched.Impact resistance is not left out, since it is also improved compared to the previous version.SLS3 rims are built from UD carbon fiber.Anti-PinchRim’s sidewalls are thickened to prevent cut of tires during impacts. (*6TERS = sisters = sœurs)
CRASH REPLACEMENTDUKE offers a "Crash Replacement" program on its carbon wheels.In case of accidents or heavy falls, violent shocks can damage your rim and render its use impossible.With our "Crash Replacement" offer we offer you a service allowing you to replace your rim on special conditions and for an unlimited period:- You benefit a 30% reduction on the price of the rim, the disassembly / reassembly fees are offered to you. En savoir plus.
BITEX Hubs recognized for their excellent quality / price / weight ratio. An excellent brand of hubs from Taiwan known for their quality of manufacture and the bearings robustness!The hub is important because it is the main weight-bearing component of the bike. The weight of bicycle and the rider, with all the rolling forces, bear down on the hubs. Amid todays varied and demanding bicycle-performance requirements, Bitex makes a wide range of bicycle hubs that offer:• Anti-bite system• Superior strength & stiffness• Longest lasting durability & reliability• Lightest weight• Smoothest rolling performance (Same bearings as DT Swiss)• Best value• Finest finishing colors
SAPIM SPOKESSapim has been producing spokes and nipples of the highest quality for over 90 years. From the beginning, maintaining a close relationship with customers has always been of the greatest importance for Sapim. --> Sapim CX-Ray (309g / 64 pcs / 292 mm)--> Sapim Super-CX Black nipples only (267g / 64 pcs / 292 mm)
NIPPLES Sapim Polyax Alu 14mm. Colors of your choice : black, red, silver, blue, gold, dark green, light green, purple, orange. --> Sapim aluminium nipples --> Sapim brass nipples (on request by completing the "Personnalisation" section)
ACCESSORIES Wheels are delivered with Duke tubeless valves, taped rims, 4x spare spokes and nipples. Wheels are available with different colors: white or black phantom or custom stickers.
Hubs recognized for their excellent quality / price / weight ratio. An excellent brand of hubs from Taiwan known for their quality of manufacture and the bearings robustness!
After saving your customized product, remember to add it to your cart. Allowed file formats are: GIF, JPG, PNG
* required fields
Be the first to write your review!
* Required fields
Submit or Cancel
ASSEMBLY IN FRANCEAll the wheels available on JPRACINGBIKE1 are assembled by hand in our offices in Vendée, France. This allows us to guarantee you a high precision and high quality assembly with optimized balancing of the spoke tensions. All this to offer you the most reliable wheels as possible.En savoir plus.
1 188,33 €
1 485,83 €
1 192,50 €
1 417,50 €
1 723,33 €
1 475,83 €
1 707,50 €
1 277,50 €
1 267,50 €
1 143,33 €