Display all pictures
Like it? Share it:
Add to wishlist
Delivery time confirmed to order
Warning: Last items in stock!
DUKE Wheelset Crazy Jack SLS2 6TERS / Chris King iso
Carbon rim for All Mountain and Enduro. Its large width optimizes the behavior of the tire and promotes efficiency, comfort and grip thanks to a larger volume of air. It offers an unrivaled lateral stiffness / weight ratio. Pair of wheels mounted with Chris King Iso Disc hubs.
Wheight of the 29" pair with CxRay spokes (32+32 spokes) 1711g RF
Name of your friend * :
E-mail address of your friend * :
* Required fields
Send or Cancel
ASSEMBLAGE EN FRANCE Toutes les roues DUKE by JPRACINGBIKE1 sont assemblées à la main dans nos...
0 Item Items
The minimum purchase order quantity for the product is 1
Add to cart
1 725,00 €
ASSEMBLY IN FRANCEAll the wheels available on JPRACINGBIKE1 are assembled by hand in our offices in Vendée, France. This allows us to guarantee you a high precision and high quality assembly with optimized balancing of the spoke tensions. All this to offer you the most reliable wheels as possible. En savoir plus.
JANTE DUKE CRAZY JACK SLS2 6TERS*Pair of carbon wheels for All Mountain and Enduro use. Its large width optimizes the behavior of the tire and thus promotes the efficiency,Comfort and grip thanks to a larger volume of air. It offers unrivaled lateral stiffness / weight ratio in its class and provides unusual sensations. Designed, developed and tested in France, The DUKE Crazy Jack in carbon has an ASYMMETRICAL profile (offset of 2,8 mm) which allows to increase the lateral stiffness of the wheel without gaining weight. The internal width between the hooks / sides is 27 mm. This gives more volume to the tires and improves efficiency, comfort and grip in turns.A wide rim also means that you can use finer, lighter tires while maintaining the comfort, softness and grip provided by a larger volume of air. Hookless design: the robustness of the rim is superior to that of a carbon rim with hooks. This technology has been used successfully on our rims since 2011. The height of the rim edge for 2015 is reduced by 1mm to further limit any risk of contact with the ground. Lateral stiffness improved by 40% compared to the previous version. Impact-resistant even on the most brittle ground: improved impact energy absorption of more than 50% compared to the previous model. Anti-burp system: the heel of the tire is held in position whatever its pressure, no risk of "unseating". Tubeless or inner tube.. En savoir plus.
In 2019, MTB rims profiles are differentiated as we do not ask the rims the same qualities while riding :A front wheel must give grip, be light, stiff and handy.A rear wheel must be more comfortable, tronger and offer more efficiency.Thus the front and rear wheels have different profiles and lay-ups.In collaboration with Rémy and Julien Absalon, the 6TERS front and rear profiles complement each other for a greater efficiency in the trails.Many of you are aware of different needs because you are already using different section tires at front and rear wheel.The Duke 6TERS* concept offers a wider front rim than the rear rim for more grip and stiffness. Its weight is optimized for robustness.The rear profile is reworked with a reduced section, with a new carbon fiber layer to improve compliance and increase the impact resistance, the constraints being much more important on the back wheel.SLS2 Factory Process ‘19All our carbon MTB rims now benefit from the manufacturing process tested and approved by the 2018 Super Light Series, which offers a 10% gain in rim’s weight.This manufacturing process goes even further today as it is now made under dust-free laboratory and no longer requires sanding nor painting.SLS2 products have an excellent aesthetic appearance, right out of the mold.As no longer painted, the rims can not be scratched.Impact resistance is not left out, since it is also improved by 20%.SLS2 rims are built from UD carbon fiber only.Anti-PinchRim’s sidewalls are thickened to prevent cut of tires during impacts. (*6TERS = sisters = sœurs)
CHRIS KING HUB ISO DiscThe Chris King hubs are just as "Rolls" for mountain bikes hubs. The ISO Disc Rear Hubs Chris King combine many qualities: performance, durability, quality.--> Chris King ISO Disc (en savoir plus)
SAPIM SPOKESSapim has been producing spokes and nipples of the highest quality for over 90 years. From the beginning, maintaining a close relationship with customers has always been of the greatest importance for Sapim. --> Sapim CX-Ray (309g / 64 pcs / 292 mm)
NIPPLES Sapim Polyax Alu 14mm. Colors of your choice : black, red, silver, blue, gold, dark green, light green, purple, orange. --> Sapim aluminium nipples--> Sapim brass nipples (on request by completing the "Personnalisation" section).
ACCESSORIES Wheels are delivered with Duke tubeless valves, taped rims, 4x spare spokes and nipples. Wheels are available with different colors: white or black phantom or custom stickers.
After saving your customized product, remember to add it to your cart. Allowed file formats are: GIF, JPG, PNG
* required fields
Be the first to write your review!
* Required fields
Submit or Cancel
ASSEMBLY IN FRANCEAll the wheels available on JPRACINGBIKE1 are assembled by hand in our offices in Vendée, France. This allows us to guarantee you a high precision and high quality assembly with optimized balancing of the spoke tensions. All this to offer you the most reliable wheels as possible.En savoir plus.
INTERIOR WIDTH front 30MM & 27MM rear
1 194,17 €
1 038,33 €
1 418,33 €
1 242,50 €
1 490,00 €
1 051,67 €
1 442,50 €