Jante DUKE Lucky Jack SLS 6TERS FR 2k19 (avant)

Like it? Share it:

Add to wishlist

  • INTERNATIONAL DELIVERY AVAILABLE
  • SUPER EXPRESS DELIVERY UPGRADE AVAILABLE

DUKE Lucky Jack SLS2 6TERS rim front (FR)


Versatile carbon wheel. Winner of the great comparison of Vojomag wheels. Designed, developed and tested in France. DUKE is a French brand from the experience of the wheel maker JPRACINGBIKE1

Delivered without stickers. If necessary, please order the stickers in the "associated products" tab.

More details

669 Items

375,00 €

Product Options
Wheel size
Holes Available

The multiple champions of the World rim, Europe and France! Winner of the XC World Cup Nove Mesto 2019! Used by the best teams and riders in the world (Absolut Abasalon Team, BMC Racing Team, Team Scott Creuse O2, Focus MTB Racing Team etc ..., as well as a certain champion of the Netherlands on Road, MTB and CX and also CX World Champion.

Julien Absalon: UCI MTB world cup 2016, Cairns Australia



ASSEMBLY IN FRANCE
All the wheels available on JPRACINGBIKE1 are assembled by hand in our offices in Vendée, France. This allows us to guarantee you a high precision and high quality assembly with optimized balancing of the spoke tensions. All this to offer you the most reliable wheels as possible. En savoir plus.


DUKE RIM LUCKY JACK SLS2 6TERS
The Lucky Jack by DUKE is a very light and broad rim for cross country and marathon use. Weighing 300g the weight is surprisingly low. Great value have the dimensions of the rim. With 31 mm outside and 25.6 mm inside the rim provides not only an excellent lateral stiffness, but also the tire optimum support width. Also at low air pressure, the driver (in) no spongy driving feel, as the tires can snap off bad side. Grip and comfort of the tire increase remarkably! Of course, the rim can be driven with sealing Tubeless "milk". The wheels are provided with an asymmetrical rim profile (as robust as a symmetrical profile), which requires a more uniform pitch angle of the spokes. This optimization of the spoke angle brings a number of advantages. The spoke tension on both sides can be better matched to one another, what is the shelf life of the spokes and the entire impeller conducive. The normally directional lateral stiffness is also adjusted so that the wheel appear rigid in itself. The height of the rim edge for 2015 is reduced by 1mm to further limit any risk of contact with the ground. Lateral stiffness improved by 40% compared to the previous version. Resistant to impacts even on the most brittle ground: Absorption of impact energy improved by more than 50% compared to the previous model. Anti-burp system: the heel of the tire is held in position whatever its pressure, no risk of "unseating". For the rim a Rider.

In 2019, MTB rims profiles are differentiated as we do not ask the rims the same qualities while riding :
A front wheel must give grip, be light, stiff and handy.
A rear wheel must be more comfortable, tronger and offer more efficiency.
Thus the front and rear wheels have different profiles and lay-ups.
In collaboration with Julien Absalon, the 6TERS front and rear profiles complement each other for a greater efficiency in the trails.
Many of you are aware of different needs because you are already using different section tires at front and rear wheel.
The Duke 6TERS concept offers a wider front rim than the rear rim for more grip and stiffness. Its weight is optimized for robustness.
The rear profile is reworked with a reduced section, with a new carbon fiber layer to improve compliance and increase the impact resistance, the constraints being much more important on the back wheel.
SLS2 Factory Process ‘19
All our carbon MTB rims now benefit from the manufacturing process tested and approved by the 2018 Super Light Series, which offers a 10% gain in rim’s weight.
This manufacturing process goes even further today as it is now made under dust-free laboratory and no longer requires sanding nor painting.
SLS2 products have an excellent aesthetic appearance, right out of the mold.
As no longer painted, the rims can not be scratched.
Impact resistance is not left out, since it is also improved by 20%.
SLS2 rims are built from UD carbon fiber only.
Anti-Pinch
Rim’s sidewalls are thickened to prevent cut of tires during impacts.

CRASH REPLACEMENT
DUKE offers a "Crash Replacement" program on its carbon wheels.
In case of accidents or heavy falls, violent shocks can damage your rim and render its use impossible.
With our "Crash Replacement" offer we offer you a service allowing you to replace your rim on special conditions and for an unlimited period:
- You benefit a 30% reduction on the price of the rim, the disassembly / reassembly fees are offered to you. En savoir plus.


DOCUMENTATION
We offer you free user manuals or information sheets to help you better understand the product you are looking for.
--> Site officiel DUKE

RIMSDUKE Lucky Jack SLS 6Ters FR (front)
- ERD 29" avant: 598mm
- UseXC, (rider max 110kg)
- MaterialUD Carbon, Inner tube compatible or Tubeless. maxi pression: 2,5 bars
- ColorBlack
- Size29"
- Rim weight330g
- HeightFront 20,5mm
- Internal widthFront 28mm
- OffsetFront 2,8mm
- Drilling24, 28 or 32 holes
- DecorationCustom stickers in option in

Write a review

DUKE Lucky Jack SLS2 6TERS rim front (FR)

DUKE Lucky Jack SLS2 6TERS rim front (FR)

Versatile carbon wheel. Winner of the great comparison of Vojomag wheels. Designed, developed and tested in France. DUKE is a French brand from the experience of the wheel maker JPRACINGBIKE1

Delivered without stickers. If necessary, please order the stickers in the "associated products" tab.

ASSEMBLY IN FRANCE
All the wheels available on JPRACINGBIKE1 are assembled by hand in our offices in Vendée, France. This allows us to guarantee you a high precision and high quality assembly with optimized balancing of the spoke tensions. All this to offer you the most reliable wheels as possible.En savoir plus.




STRENGTHS :


LIGHTNESS


ASYMMETRY


LATERAL RIGIDITY


COMFORT


PRECISION PILOTAGE


NERVOSITY

5 similar items


2016 © Jpracingbike1. Tous droits réservés. Création E-metis Webdesign